mechanical mixing

However , VMS can do a lot more than just replacing the burner 's mechanical mixing system .

然而VMS不仅仅可以替代燃烧器机械混合系统，她还能够实现更多的功能。

Preparation process of ZrB_2 / B_4C ceramic composites by pressureless sintering based on mechanical mixing

基于机械混合法无压烧结制备ZrB2/B4C陶瓷复合材料

Testing method for mechanical mixing of hydraulic cement pastes and mortars of plastic consistency

水凝水泥膏和水泥浆的机械搅拌方法

A TPU / PVC blend for medical use Was prepared by mechanical mixing .

用机械共混方法研制医用TPU/PVC共混材料。

Preparation of dopped carbon anodes by mechanical mixing method

机械法制备铝电解用掺杂碳阳极

Physical and Chemical Mechanism of Mechanical Mixing of Powder Styrene-butadiene Rubber Composites Filled with High Contents of Carbon Nanotubes

高填充量碳纳米管/丁苯粉末橡胶机械混炼的物理化学机制

The interaction exists between ZrO_2 particle and substrate and it is not simple mechanical mixing between them .

ZrO2微粒与基质金属间不是简单的机械混合，而是存在相互作用。

The problem of composition segregation in mechanical mixing method has overcome by controlling the viscosity of the feed pulp .

通过控制料浆粘度，克服了机械混料方法中成分偏析的缺点。

The impregnation with stirring and ultrasonic treatment had much better sulfur retention effect than mechanical mixing for the high dispersion .

机械搅拌法和超声搅拌法加入的Ca（OH）2由于高分散性，表现出比机械混合更好的固硫效果，其中超声的作用尤其明显。

In conventional treatment process , mechanical mixing , grid reaction , horizontal flow sedimentation tank and type V filtering tank are adopted .

常规处理工艺采用机械混合、网格絮凝、平流沉淀池及V型滤池。

The catalyst prepared by precipitation sedimentation method had a higher catalytic activity for DME synthesis than the catalyst prepared by mechanical mixing method .

采用共沉淀沉积法制备的催化剂对于二甲醚合成的活性明显高于机械混合法制备的催化剂。

With respect to the performance of modified bitumen , emulsion method is more suitable to CaSO_4 whiskers than mechanical mixing method .

通过对比采用机械搅拌法和胶乳法CaSO4晶须改性沥青的性能差异，提出胶乳法有利于发挥CaSO4晶须的改性作用。

Mechanical mixing flocculation experiments were designed and applied to Jialing River raw water so as to investigate performances of the new ramp .

为了考察这种新型斜板的沉淀性能，设计了机械搅拌絮凝配合验证，并将该水处理方法运用于嘉陵江原水。

The PTFE-based composites are prepared by using PTFE and several additives through mechanical mixing , cold compressing and sintering molding .

将聚四氟乙烯（PTFE）和几种添加物采用机械共混、冷压、烧结成型的方法制备了PTFE基复合材料。

Several conventional polyurethane nano modification methods such as mechanical mixing method , in-situ polymerization method , insert-layer polymerization method and their research progress are introduced .

介绍了机械混合法、原位聚合法、插层聚合法几种常用的聚氨酯纳米改性方法及其研究进展。

Research on Rural Domestic Sewage Disposal of Biologic Disposal High Efficiency Blender testing method for mechanical mixing of hydraulic cement pastes and mortars of plastic consistency

潜水搅拌器在处理农村生活污水中的应用水凝水泥膏和水泥浆的机械搅拌方法

The composites of PTFE filled with different mass fraction of Al 2O 3 particle were prepared by mechanical mixing , compressing molding and sintering .

用机械共混、冷压成型烧结的方法制备了Al2O3/PTFE复合材料试样。

A series of MoP / γ - Al2O3 hydrofining catalysts were prepared by impregnation and mechanical mixing methods . Different preparing conditions were examined .

采用机械混合法和浸渍法制备了一系列MoP／γ-Al2O3催化剂，并考察了制备条件对催化剂性能的影响。

It was found that the buffer-solution method , compared with the mechanical mixing method , can assure more homogeneous distribution of Ni in YSZ substrate .

分析表明，与机械混合法相比，缓冲溶液法能够使Ni在YSZ基质中分布更均匀。

By mechanical mixing of ABS and HPVC ( high polymerization degree poly ( vinyl chloride )) at high temperature , polymer alloys with good overall properties are prepared .

将ABS和HPVC高温机械共混，制备了综合性能好的聚合物合金。

Therefore , the high silicon aluminum alloy which prepared by mechanical mixing were isothermal heat treated in semi-solid states , to improve the microstructure and the properties of the alloys .

因此，对机械搅拌法制备的高硅铝合金进行半固态重熔等温处理，研究了等温处理对改善合金显微组织和凝固缺陷以及性能的影响。

TEM and SEM images of modified carbons shows that lead can be evenly distributed in the carbon surface and pores by chemical deposition , while mechanical mixing could not .

结合TEM和SEM图分析可知沉积法可以将铅均匀分布于炭材料表面和孔道中，优于机械混合法。

Solution re-doped PANI and mechanical mixing re-doped PANI were used and researched by the technique route of dope - de-dope-re-dope PANI .

采用掺杂-脱掺杂-再掺杂的技术路线，分别用溶液法及机械研磨法对本征态聚苯胺进行了再掺杂研究。

Through mechanical mixing of NiAl , Ni and WC powders , making preform , presintering and lap welding , Ni 3 Al based composites have been successfully made .

通过机械合金化，将NiAl粉、Ni粉和WC粉机械混合，制坯，半烧结，再堆焊形成以Ni3Al为基，WC颗粒强化的复合材料。

PTFE ( polytetrafluoroethylene ) composite modified by nano-meter CaCO_3 was prepared by means of mechanical mixing and cold-press sintering , and the mechanical properties of the composite were studied .

通过机械搅拌、冷压成型烧结方法，制备了纳米碳酸钙填充改性聚四氟乙烯（PTFE）复合材料；并研究了复合材料的物理机械性能。

According to techniques of polymer modified bitumen , a principle of preparing technique for CaSO_4 whiskers modified bitumen is introduced on which the emulsion method and mechanical mixing method are used in this study .

本文在借鉴高分子聚合物改性沥青的加工工艺基础上，提出了制备CaSO4晶须改性沥青的工艺原则。根据这一原则，确定用胶乳法和机械搅拌法加工CaSO4晶须改性沥青。

Polyphenylenesulphide ( PPS ) suspension dope was prepared using the method of mechanical mixing , and the PPS coating was prepared in metal surface through the process of high-temperature plastication .

采用机械共混的方法配制了聚苯硫醚（PPS）悬浮液，并通过高温塑化工艺在金属表面制备了涂层，确定了合适的热处理工艺参数。

PPy / SnO2 hybrid materials with different PPy content were prepared by mechanical mixing , and the sensitivities of the hybrids to toxic gases NH3 , H2S , NO at low temperature were studied .

用机械共混法制备了含不同聚吡咯的聚吡咯/二氧化锡杂化材料，研究其低温下对有毒气体NH3、H2S、NO的敏感性。

Hydroxyapatite ( HA ) powder was synthesized by Sol-Col method from Ca ( OH ) 2 and H3PO4 . The HA powder was coated with a 304L stainless steel powder using mechanical mixing method .

以Ca（OH）2和H3PO4为反应物，通过溶胶-凝胶法制备了羟基磷灰石（HA）粉体；

The results show that mechanical mixing instead of hand mixing can decrease relative error from 1.96 % to 0.50 % , the maximum error can be reduced from 5.40 % to 1.80 % if the instrument 's temperature is kept constant .

结果表明，用机械搅拌代替人工搅拌后相对误差可从196%降至05%，再采用仪器恒温后还能把最大误差从540%降至180%。